Installation Instructions

 
Home
About Us
Our Products
Installation
Instructions
Florida
Certified Products
Warranty
Where to
Purchase
Glossary
Contact Us



General Aluminum Windows and Patio Doors are designed for easy installation.

The following installation instructions presented are MINIMUM installation guidelines. In many areas good building practice and/or code require integration of the window with an appropiate weather-resistive barrier and flashing. GA has more detailed installation instructions presented below that we strongly recommend. GA shall bear no responsibility if its products are not prepared, installed, sealed, fastened, flashed and cared for in accordance with GA instructions, good building practice and code. GA assumes no responsibility for improper product selection or installation. It is the sole responsibility of the purchaser to make product and glazing selections in compliance with applicable laws and building codes.

Click on the appropiate link below for MINIMUM installation guidelines

ALUMINUM WINDOW STICKER INSTRUCTIONS

VINYL WINDOW STICKER INSTRUCTIONS

The following installation instructions are based on an ASTM (American Society for Testing and Materials) standard that has been adapted by AAMA (American Architectural Manufacturers Association) and is the basis for their ceritified installer program. It is one recognized and accepted method used in many parts of the country.

It should be noted that there are numerous other installation methods that when done correctly can achieve the desired result of a leak resistant installation.

General Aluminum produces product for many parts of the country and is used in a large variety of construction types. It is because of these different applications that General Aluminum recommends that you discuss specific installation requirements with your architect or design engineer.

CLICK ON THE SERIES NUMBER BELOW TO FIND RECOMMENDED INSTALLATION INSTRUCTIONS FOR THE WINDOWS AND DOORS YOU'RE ORDERING.